Home > wind power bearing > Self-lubricating wind power bearings
Self-lubricating wind power bearings
Self-lubricating wind power bearings
2014-08-14 by seoerccy
Application
Joint bearings are widely used in hydraulic engineering, metal forming machine, construction machinery, automation equipment, automotive shock absorbers, irrigation machinery and other industries. Joint bearing joint bearing Introduction slewing drives and classification is wind power bearings, the basic type is composed of a spherical sliding spherical contact surface the inner and outer components. Depending on their structure and types, can withstand radial load, axial load, or radial, axial joint load.

Because spherical plain bearings of sliding contact area, the tilt angle is large, but also because most of the plain bearings taken a special process methods, such as surface phosphate, zinc, chrome or outside the sliding surface lining, insert pads, such as spraying, Therefore, greater load capacity and impact resistance, and has anti-corrosion, wear wind power bearing resistance, self-aligning, self-lubricating lubrication good or dirt contamination without lubrication characteristics, even dislocation can be installed to work properly. Therefore, joint bearings are widely used for slower swing motion, tilt and rotation movement.
Composition
Plain Bearings mainly by an outer ring and an inner ring. The spherical inner and outer spherical outer ring composed of sliding friction.



   keywords:    wind power bearing
Top↑