Home > vertical mill bearing > vertical mill bearings angular contact ball bearing
vertical mill bearings angular contact ball bearing
vertical mill bearings angular contact ball bearing
2014-09-15 by seoerccy
3,air dry after cleaning cleaning oil, visual inspection for damage;
4, with about a 150mm, angular contact ball bearing diameter equal to the inner diameter of the stick (preferably hollow tube), one end fixed to a bearing;
5, rapid rotation of the vertical mill bearing by hand while the stick (wooden pipe) and the other end on top of the microphone audio amplifier or listening to the debate on the ear bearing rotation noise;
6, horizontal toggle the fixed bearing sticks, check bearing wear loose;
7, loose serious, turn the noise is too large, there is a serious defect FAG bearings should be eliminated, replaced with the same Angular contact ball bearings model;
8, take a bucket of the appropriate amount of grease (high quality yellow dry oil) with gentle heat to melt (not hot), will detect over-bearing into the bucket to soak no bubbles overflow. Bearing grease to cool before removing residual grease less. After cooling remove grease angular contact ball bearings, grease residue quantity. Determine how many of the remaining amount of grease required.
9, with a soft cloth or tissue paper to wipe the outside of the bearing grease will FAG bearings fitted to the pulley undisturbed security, maintenance work is completed.



   keywords:    vertical mill bearing
Top↑