Home > stacker-reclaimer bearing > Types Needle roller bearings
Types Needle roller bearings
Types Needle roller bearings
2015-05-22 by seoerccy
In addition to catalogs listed, bearings can be used in general engineering, such as: open Needle roller bearings needle roller bearings (1), closed needle roller bearings (2), needle bearing inner ring (3 ) and non-needle bearing inner ring / no no inner cage needle roller bearings (4), cage and needle roller bearings without cage filled (5) SKF reali slim bearings can also supply various types of needle roller bearings, a , needle roller cage assemblies 2, 3 needle roller bearings without ribs, self-aligning 4, combined needle roller / ball bearings 5, combined needle roller / thrust ball bearings 6, combined needle roller / cylindrical roller thrust bearings.

Drawn Cup
Needle roller bearings with a thin metal forming the outer ring needle roller bearings. Its main feature is the low sectional height and slewing ring bearings the ability to withstand high loads. Mainly used for compact, inexpensive and bearings inside the hole can not be used as needle roller cage assemblies raceway stacker-reclaimer bearing configuration. Bearings and bearing housings shall interfere with the way the installation. If you can save the axial positioning box shoulder, retaining ring and other functions, then the bearings inside the hole can be made very simple and economical.
Mounted on the shaft of the drawn cup needle roller bearings with bilateral and unilateral open closed. Drawn cup closed proximal end surface can withstand small axial guiding force.
Needle roller bearings are generally not attached to the Full complement cylindrical roller bearings inner ring. In the journal of the occasion can not be hardened and ground, you can use the inner listed in the table.



   keywords:    stacker-reclaimer bearing
Top↑