Home > agricultural bearings > Angular contact bearings
Angular contact bearings
Angular contact bearings
2014-08-16 by seoerccy
GAC ... S-type inner and outer rings are hardened bearing steel outer ring grooves and hole. Can withstand the radial load and an axial direction (joint) load.

thrust bearings
GX ... S-type shaft ring and seat are hardened bearing steel; seat has grooves and hole. Can withstand axial load in one direction or the Angular contact ball bearings combined load (radial load value at this time is not greater than 0.5 times the value of the axial load).
Rod ends
(1) SI ... E-type is GE ... E-type bearings and rod end assembly. Rod ends with female thread, material is carbon steel, no oil tank. Able to support radial load and axial load in any one direction is less than or equal to 0.2 times the radial load.
(2) SA ... E-type is GE ... E-type bearings and rod end assembly. Rod ends with male thread, material is carbon steel; no oil tank, can withstand radial load and any direction is less than or equal to 0.2 times the radial load axial Thrust roller bearings load.
(3) SI ... ES type is GE ... ES type bearings and rod end assembly. Rod ends with female thread, material is carbon steel; slot. Able to support radial load and axial load in any one direction is less than or equal to 0.2 times the radial load.
(4) SA ... ES type is GE ... ES type bearings and rod end assembly. Rod ends with male thread, material is carbon steel; slot. Able to support radial load and axial load in any one direction is less than or equal to 0.2 times the radial load.
(5) SIB ... S-type rod ends with female truck mounted crane bearing thread, material is carbon steel; inner ring of hardened bearing steel; slot. Able to support radial load and axial load in any one direction is less than or equal to 0.2 times the radial load.
(6) SAB ... S-type rod ends with male thread, material is carbon steel; inner ring of hardened bearing steel; slot. Able to support radial load and axial load in any one direction is less than or equal to 0.2 times the radial load.
(7) SQ ... type of ball joint rod end bearings, rod ends for carbon steel; ball head for carburizing steel. Can withstand the radial load and smaller axial load in either direction.



   keywords:    agricultural bearings
Top↑